Windows 2000 - Siemens Gigaset Owner's Manual

Windows 2000

1. Click the Start button and choose Settings, then click Control Panel.
2. Double click the Network and Dial-up Connections icon, then Local Area Connec-
tion icon, and press the Properties button in the General tab.
3. Select the TCP/IP protocol in the Local Area Connection Properties window.
4. Click the Properties button to set the TCP/IP protocol for the Gigaset Router.
5. You can dynamically assign TCP/IP address settings to a client, or you can manually
configure a client with address settings to meet your specific network requirements.
(Note that the default IP address of the Gigaset Router is 192.168.2.1.)
Configuring Client TCP/IP
51