Assembly Instructions - Yardworks 60-3983-8 Owner's Manual

Assembling the Handle (Fig. 1)
1. Remove any packing material that may have been inserted between the upper and lower handles for shipping
purposes.
2. Align the holes (4) on the upper handle (1) with the holes on the middle handle (2). Insert the bolts (5), and use
the wing nuts (6) to tighten them. (Fig. 1.1)
3. Align the holes (7) on the middle handle (2) and the lower handle (3). Insert the bolts (5), and tighten them using
the wing nuts (6) provided. (Fig. 1.2)
Assembling the Discharge Chute (Fig. 1)
1. Position the chute deflector (8) over the discharge chute (9), and align the mounting holes. (Fig. 1.3)
Insert a rubber washer (12) between the chute deflector (8) and the discharge chute, maintaining the alignment
2.
of the holes (10).
3. Attach the chute deflector to the discharge chute using a carriage bolt (11), 2 washers (12), and a locknut (13).
4. Insert a rubber washer (15) between the chute deflector (8) and the discharge chute, maintaining the alignment
of the holes (17).
5. Attach the chute deflector to the discharge chute using 2 carriage bolts (14), 4 washers (15), 4 external teeth
serrated lock washers (18), and 2 locknuts (16).
Note: Do not overtighten the bolts.
17
16
12
11
Fig. 1.3
Fig. 1

ASSEMBLY INSTRUCTIONS

8
10
18
15 14
13
12
9
1
2
8
3
Fig. 1.1
Fig. 1.2