HP procurve switch 2650 Access Security Manual page 132

Configuring Port-Based Access Control (802.1x)
Displaying 802.1x Configuration, Statistics, and Counters
5-22
show port-access authenticator (Syntax Continued)
[ e ] < port-list >
statistics
Shows whether port-access authenticator is
active and the statistics of the specified port.
Includes the supplicant's MAC address, as deter-
mined by the content of the last EAPOL frame
received on the port. The statistics values are
blank if the specified port is not enabled as an
authenticator.
session-counters
Shows whether port-access authenticator is
active the session data, session status on the
specified port. Also, for each port, the "User"
column lists the user name the supplicant
included in its response packet. (For the switch,
this is the identity setting included in the suppli-
cant command—page 5-19.) The fields are blank
if the specified port is not enabled as an authen-
ticator.
[ statistics ]
Same as the statistics command (above), but for
all ports on the switch that are enabled as authen-
ticators.
[ e ] < port-list >
Same as the [ e ] < port-list > statistics command
(above).
[ session-counters ]
Same as the [ e ] < port-list > session-counters com-
mand (above), but for all ports on the switch that
are enabled as authenticators.
[ e ] < port-list >
Same as the [ e ] < port-list > session-counters com-
mand (above).