Configuring The Switch For Ssh Operation; Assigning Local Operator And Manager Passwords - HP procurve switch 2650 Access Security Manual

Configuring the Switch for SSH
Operation
SSH-Related Commands in This Section
show ip ssh
show ip client-public-key [< babble | fingerprint >]
show ip host-public-key [< babble | fingerprint >]
show authentication
crypto key < generate | zeroize > [rsa]
ip ssh
key-size < 512 | 768 | 1024 >
port < 1 - 65535 >
timeout < 5 .. 120 >
aaa authentication ssh
login < local | tacacs | radius | rsa >
< local | none >
enable < tacacs | radius | local >
< local | none >
copy tftp pub-key-file <tftp server IP> <public key file>
clear public key

1. Assigning Local Operator and Manager Passwords

At a minimum, HP recommends that you always assign at least a Manager
password to the switch. Otherwise, under some circumstances, anyone with
Telnet, web, or serial port access could modify the switch's configuration.
To Configure Local Passwords. You can configure both the Operator and
Manager password with one command.
Syntax: password < manager | operator | all >
Configuring Secure Shell (SSH)

Configuring the Switch for SSH Operation

Page
4-17
4-24
4-14
4-20
4-11
4-16
4-16
4-16
4-16
4-18, 4-19
4-18
4-18
4-18
4-24
4-25
4-9