Speaker assembly
Description
Speaker assembly
Before removing the speaker assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the switch cover (see
6.
Remove the keyboard (see
Remove the speaker assembly:
1.
Disconnect the speaker assembly cable (1) from the power button board.
2.
Remove the wireless antenna cables and microphone cable from the clips (2) in the speaker
assembly.
3.
Remove the two black Phillips PM2.5×5.0 screws (1) that secure the speaker assembly to the
computer.
Battery on page
41).
Switch cover on page
Keyboard on page
58).
56).
Component replacement procedures
Spare part number
432994-001
61