Top Cover Trim - HP Pavilion dv9500 Maintenance And Service Manual

6.
If it is necessary to replace the fingerprint reader board cable, release the ZIF connector (1) to which
the cable is connected and disconnect the cable (2) from the system board. The fingerprint reader
board cable is included in the Cable Kit, spare part number 448015-001.
Reverse this procedure to install the ExpressCard assembly and the fingerprint reader board cable.

Top cover trim

Description
Top cover trim
Before removing the top cover trim, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
Switch cover (see
d.
Keyboard (see
e.
Speaker assembly (see
f.
Display assembly (see
g.
Top cover (see
Chapter 4 Removal and replacement procedures
82
Battery on page 41).
Hard drive on page 46)
Optical drive on page
Switch cover on page
Keyboard on page 58)
Speaker assembly on page
Display assembly on page
Top cover on page 70)
54)
56)
61)
64)
Spare part number
432978-001