Wireless Switch Board - HP Pavilion dv9500 Maintenance And Service Manual

Wireless switch board

Description
Wireless switch board (includes wireless switch board cable)
Before removing the wireless switch board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
Switch cover (see
d.
Keyboard (see
e.
Speaker assembly (see
f.
Display assembly (see
g.
Top cover (see
Remove the wireless switch board:
1.
Release the ZIF connector to which the wireless switch board cable is connected and disconnect the
wireless switch board cable (1) from the system board.
2.
Remove the two silver Phillips PM2.5×5.0 screws (2) that secure the wireless switch board to the
base enclosure.
Battery on page 41).
Hard drive on page 46)
Optical drive on page
Switch cover on page
Keyboard on page 58)
Speaker assembly on page
Display assembly on page
Top cover on page 70)
54)
56)
61)
64)
Component replacement procedures
Spare part number
432991-001
75