Expresscard Assembly - HP Pavilion dv9500 Maintenance And Service Manual

3.
Remove the front USB board (3).
Reverse this procedure to install the front USB board.

ExpressCard assembly

Description
ExpressCard assembly
Before removing the ExpressCard assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
Switch cover (see
d.
Keyboard (see
e.
Speaker assembly (see
f.
Display assembly (see
g.
Top cover (see
Chapter 4 Removal and replacement procedures
80
Battery on page 41).
Hard drive on page 46)
Optical drive on page
Switch cover on page
Keyboard on page 58)
Speaker assembly on page
Display assembly on page
Top cover on page 70)
54)
56)
61)
64)
Spare part number
432988-001