BIOS
First/ Second/ Third Boot Device
These fields determine the drive that the system searches first for an
operating system. The options available include
Setting: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2, HDD-3,
ZIP100, USB-FDD, USB-ZIP, USB-CDROM, USB-HDD, LAN and
Disabled.
Boot Other Device
It allows the system to search for an OS from other devices other than the
ones selected in the First/ Second/ Third Boot Device.
Setting: Enabled (Default), Disabled.
Swap Floppy Drive
It allows you to determine whether or not to enable Swap Floppy Drive.
When enabled, the BIOS swaps floppy drive assignments so that Drive A
becomes Drive B, and Drive B becomes Drive A.
Setting: Disabled (Default), Enabled.
Boot Up Floppy Seek
This feature controls whether the BIOS checks for a floppy drive while
booting up. If it cannot detect one (either due to improper configuration or its
absence), it will flash an error message.
Setting: Enabled (Default), Disabled.
Boot Up NumLock Status
It allows you to activate the NumLock function after you power up the
system.
Setting: On (Default), Off.
32