Table of Contents
Advertisement
IDE Primary HDDs / IDE Secondary HDDs
The onboard PCI IDE connectors provide Primary and Secondary channels
for connecting up to four IDE hard disks or other IDE devices.
Each channel can support up to two hard disks; the first is the "Master" and
the second is the "Slave".
Press <Enter> to configure the hard disk. The selections include Auto,
Manual, and None. Select 'Manual' to define the drive information manually.
You will be asked to enter the following items.
Cylinder:
Head:
Precomp:
Landing Zone: Landing zone
Sector:
The Access Mode selections are as follows:
CHS
LBA
Large (for MS-DOS only)
Auto
Remarks: The main board supports two serial ATA ports and are represented
in this setting as IDE Channel 0.
Drive A / Drive B
These fields identify the types of floppy disk drive A or drive B that has
been installed in the computer. The available specifications are:
None
720K, 3.5 in.
Video
This field selects the type of video display card installed in your system.
You can choose the following video display cards:
EGA/VGA
CGA 40
CGA 80
MONO
Number of cylinders
Number of read/write heads
Write precompensation
Number of sectors
(HD < 528MB)
(HD > 528MB and supports Logical Block Addressing)
360K, 5.25 in.
1.44M, 3.5 in.
For EGA, VGA, SEGA, SVGA or PGA monitor
adapters. (default)
Power up in 40 column mode.
Power up in 80 column mode.
For Hercules or MDA adapters.
1.2M, 5.25 in.
2.88M, 3.5 in.
BIOS
29
Advertisement
Table of Contents
