Selecting The Dialing Mode - Panasonic KX-TG2583CB Operating Instructions Manual

Settings

Selecting the Dialing Mode

You can program the dialing mode using the handset near the base
unit.
If you have touch tone service, set to "Tone". If rotary or pulse service is
used, set to "Pulse". Your phone comes from the factory set to "Tone".
Make sure the unit is in the standby mode initially.
Press
1
(FUNCTION/EXIT/CH)
Press
2
Ö
points to "Program".
Press
3
FWD/EDIT á
Press
4
Ö
points to "Set dial mode".
Press
5
FWD/EDIT á
Press
6
Ö
"Tone".
7 Press
FWD/EDIT á
•A beep sounds.
•To return to the standby mode, press
(FUNCTION/EXIT/CH).
•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
•If the handset has lost communication with the base unit, 3 beeps sound and "No
link to base. Place on cradle and try again." is displayed.
14
or repeatedly until the arrow
Ñ
(Yes key).
or repeatedly until the arrow
Ñ
(Yes key).
or to select "Pulse" or
Ñ
(Save key).
.
H
Save directory
Ringer volume
GF H
H
Program
GF H
H
Save DIRECT#
Set flash time
GF H
Set line mode
H
Set dial mode
GF H
Dial mode
:Tone
GF H
=Save
Dial mode
:Pulse
GF H
=Save
Dial mode
:Pulse
=Yes
=Yes
=Yes
=Yes