Selecting The Dialing Mode - Panasonic KX- TG2583B Operating Instructions Manual

Selecting the Dialing Mode

You can program the dialing mode
unit
If you have touch tone service, set to "Tone" If rotary or pulse service is
used, set to "Pulse" Your phone comes from the factory set to "Tone"
Make sure the unit is in the standby mode initially.
Press
Press @ or &J repeatedly until the arrow
points to L(ProgramV
Press
Press @ or &I repeatedly until the arrow
points to "Set dial mode"
Press
Press @ or Q to select "Pulse" or
"Tone"
Press
l
YOU can exit the programming mode any time by pressing
link to base Place on cradle and try again
using the handset near the base
(Yes key)
(Yes key)
(Save key)
"isdisplayed