Selecting The Ringer Volume - Panasonic KX-TG2583CB Operating Instructions Manual

Programmable Functions

Selecting the Ringer Volume

You can set the handset and base unit ringer volumes to HIGH, LOW or
OFF. If set to OFF, the handset/base unit will not ring. Your phone comes
from the factory set to HIGH.
With the handset
Make sure the unit is in the standby mode initially.
Press
1
(FUNCTION/EXIT/CH)
Press
2
Ö
arrow points to "Ringer volume",
and press
3 Press
Ö
desired volume.
•The selected volume is displayed and
rings.
•To turn the ringer OFF, press and
hold Ö until 2 beeps sound.
To turn the ringer ON, press
in step 3.
•The ringer will sound at the LOW level.
•You can also select the ringer volume while a call is being received.
Press Ö or Ñ while the unit is ringing.
•When set to OFF, "Ringer off" will flash for about 45 seconds before the
handset returns to the standby mode.
•When you replace the battery, the selected ringer volume setting will return to the
factory set (HIGH). Reprogram if necessary.
With the base unit
Make sure the unit is in the standby mode initially. (You can also select
the ringer volume while a call is being received.)
•To select HIGH or LOW, press
(HOLD/RINGER)
button, the selected ringer volume will be
displayed and ring.
•To turn the ringer OFF, press and hold
(HOLD/RINGER)
"Ringer off" will be displayed.
•To turn the ringer ON, press
(HOLD/RINGER)
the HIGH level.
18
or repeatedly until the
Ñ
(Yes key).
FWD/EDIT á
or to select the
Ñ
. Each time you press the
until 2 beeps sound.
. The ringer will sound at
.
or
Ñ Ö
HIGH
Save directory
H
Ringer volume
GF
Ringer
Low ❚ ❚ ❚ ❚ ❚ ❚ High
HIGH
GF
Low ❚ ❚
LOW
OFF Ringer off
Ringer
Low ❚ ❚ ❚ ❚ ❚ ❚ High
Low ❚ ❚
LOW
OFF Ringer off
H
=Yes
❚ ❚ ❚ ❚
High
❚ ❚ ❚ ❚
High