Panasonic KX-TG2593B Description

This document is a text description of the control panel
layout for the product listed below.
"PDF" files of the complete operating instructions are
available from the Customer Support section of
www.Panasonic.com.
If you need the operating instructions in an alternate
format, please request it from Customer Support.
Model Number KX-TG2593B
2.4GHz 2LINE Cordless Answering System
Handset
With the handset facing you, the antenna is at the top right. Below the earpiece is the display.
Immediately below the display are three buttons: the left one is the LINE 1 button, the middle one is the
LINE 2 button and the right one is the CONFERENCE button. In the center below these buttons is the
NAVIGATOR, a large cross key consisting of UP and DOWN TRIANGLES on the vertical row, and
RIGHT and LEFT TRIANGLES on the horizontal row.
To the upper left of the NAVIGATOR key, a triangular button is the TALK. Below this button is the
CHANNEL button. The CHANNEL button is also the FUNCTION or EXIT button. To the upper right of
the NAVIGATOR key is the DIRECT button. Below this is the INTERCOM button. The INTERCOM
button is also the HOLD or CLEAR button.
Below these buttons is the telephone keypad laid out in the conventional arrangement. Below the keypad
on the left is the FLASH button. The FLASH button is also the CALL WAIT or PLAYBACK button.
Below the keypad on the right is the REDIAL button. The REDIAL button is also the PAUSE button.
On the sides of the handset, there are the charge contacts at the very bottom.
The headset jack is on the left side of the handset, with a rubber cover.
Base unit
With the base unit facing you, the two antennas should be straight up on either side, toward the back of
the unit. Between the antennas is a cradle for charging the handset standing up, which only fits one way.
Moving toward the front of the unit in the center in front of the cradle is the speakerphone speaker. The
speaker ends in a semicircle.
In front of the speakerphone in the center is the display.