Selecting The Caller's Recording Time - Panasonic KX-TG2583CB Operating Instructions Manual

Preparing the Answering System

Selecting the Caller's Recording Time

You can select "1 minute", "3 minutes" or "Greeting only" for the caller's
recording time. Your phone comes from the factory set to "3 minutes".
1 Press
(FUNCTION/EXIT/CH)
2 Press
Ö
points to "Program".
3 Press
FWD/EDIT á
4 Press
Ö
points to "TAD program".
5 Press
FWD/EDIT á
•The base unit display shows programming
options.
Press
6
(5)
•The current setting is displayed on the base
unit.
7 Press
(1)
time.
1: 1 minute
2: 3 minutes
3: Greeting only
8 Press
FWD/EDIT á
•A beep sounds.
•To return to the standby mode, press (FUNCTION/EXIT/CH).
If you select "Greeting only", the unit will answer a call with the greeting
message, and then hang up. The unit will not record any incoming
messages. The base unit display will show "Greeting only" in the
standby mode but the number of incoming messages will not be
displayed.
24
or repeatedly until the arrow
Ñ
(Yes key).
or repeatedly until the arrow
Ñ
(Yes key).
.
, or to select the recording
(2) (3)
(Save key).
.
H
Save directory
Ringer volume
GF
H
Program
GF
H
Save DIRECT#
Set flash time
GF
Talk switching
H
TAD program
GF
Answering
system setting.
See base unit.
Base unit display
Recording time
:3min
Base unit display
Recording time
:Greeting only
H
=Yes
H
=Yes
H
=Yes
H
=Yes