Service Mode; Information Screen Display And The Factory Default Settings - Pioneer BDP-120 Service Manual

5

6. SERVICE MODE

QQ
3 7 63 1515 0

6.1 INFORMATION SCREEN DISPLAY AND THE FACTORY DEFAULT SETTINGS

To confirm the model name, region number, and drive version, or to reset to the factory default settings, proceed as follows:
Turn on the unit then press the REP_A key on the remote control unit for service (GGF1067). The MAIN TEST MENU screen
shown below will be displayed:
For operation of the MAIN TEST MENU screen, use the remote control unit supplied with this unit. Confirm on the screen that
the settings are proper.
1 MODEL: Model name and region
2 Region CK BD/DVD: Region No.
3 BD Drive Ver.: Version of the drive
4 SHIP: For resetting to the factory default
(The SHIP setting item is also provided on the User menu. For details, refer to the operating instructions of the unit.)
TE
L 13942296513
To reset to factory default, proceed as follows:
1. Select "SHIP" then "ON" on the menu, using the [
ENTER key.
2. The "WAIT" message flashes for about 10 seconds. NEVER perform other operations while this message is flashing.
3. The message shown below is displayed on the screen, then the unit is shut itself off.
4. Turn on the unit again. The On Screen Language setting screen is displayed, as shown below. Select the language.
www
.
5
http://www.xiaoyu163.com
6
1
2
3
4
For operation, use the [ /
x ao u163
y
i
6
http://www.xiaoyu163.com
2 9
8
/ / ] key and OK key on the supplied remote control unit.
Q Q
3 6 7 1 3
/ / / ] key on the supplied remote control unit, then press the
.
BDP-120
7
9 4 2 8
1 5 0 5 8 2 9 9 4
m
co
7
8
9 9
A
B
C
2 8 9 9
D
E
F
35
8