Service Mode; Osd - Pioneer BDP-320 Service Manual

5

6. SERVICE MODE

QQ
3 7 63 1515 0

6.1 OSD

[1] INDICATION ITEMS FOR THE OSDS FOR DEBUGGING
Remote Control
Unit Command
[ESC]+[DISP]
[ESC]+[SIDE-B]
[ESC]+[DISP]+[2]
TE
L 13942296513
[ESC]+[DISP]+[3]
[ESC]+[DISP]+[4]
www
.
5
http://www.xiaoyu163.com
6
Screen
1st screen Service Indication (software information)
Product serial No./destination
Model No.
Released version No.
Revision No.
Submicrocomputer version data
Drive model No.
Drive version No.
Drive serial No.
DVD-Video region No.
BD-ROM region No.
CPRM ID
MAC address
2nd screen OSD Filter
Setup value of the OSD FILTER
1st screen Specifications 1 for error rate measurement (with OK/NG judgment)
Results of error rate measurement OK/NG
1st screen Specifications 2 for error rate measurement (for continuous playback)
Title/Chapter data
Playback duration data
LgcSct address data
Error rate data (error rate value)
1st screen ATA/ATAPI DEBUG OSD-Command history (ALL)
Packet command from the host
Error data from the status register
2nd screen ATA/ATAPI DEBUG OSD-Command history (ERROR)
Packet command that has been failed
Error Code
Command-specific information
3rd screen ATA/ATAPI DEBUG OSD-Drive maintenance data
Power ON/accumulated power-on duration
LD read power-on duration for the BD
LD read power-on duration for the DVD
Serial No. of the PU
4th screen ATA/ATAPI DEBUG OSD-Judgment of LD degradation
Judgment of degradation of the LD for the BD (OK/NG)
Judgment of degradation of the LD for the DVD (OK/NG)
Judgment of degradation of the LD for the CD (OK/NG)
Temperature inside the writer
Results of self-diagnosis
Version/Revision Nos. of the SKY chip
HDMI transmitter IC check
Communication check of the submicrocomputer
PLL synthesizer check
x ao u163
y
DRIVE check
i
6
http://www.xiaoyu163.com
2 9
8
Indication Items for the OSDs
Q Q
3 6 7 1 3
.
BDP-320
7
9 4 2 8
Remarks
Refer to "[3] SERVICE
INFORMATION DISPLAY"
Refer to "[4] OSD FILTER SETTING"
Refer to "[6] ERROR RATE
MEASUREMENT 1 AND
OK/NG JUDGMENT"
Not Used
1 5 0 5 8 2 9 9 4
Refer to "[7] ATA/ATAPI DEBUG OSD"
Refer to "[7] ATA/ATAPI DEBUG OSD"
Refer to "[5] SELF-DIAGNOSIS
RESULT DISPLAY"
m
co
7
8
9 9
A
B
C
2 8 9 9
D
E
F
25
8