Pioneer BDP-180 Update Instructions

System Firmware Update Instructions for Model BDP-180 using a USB memory device
NOTE:
- If you have any difficulty carrying out these instructions, please first refer to the System Firmware Update FAQ
included in this document and/or contact Pioneer Customer Support Center.
A. Check the current firmware version of the player:
Using the player's remote control:
1. Press the "STANDBY/ON" button to switch the unit on.
* If the player starts to play a disc, press the "STOP" button and wait until the Pioneer logo is displayed on your TV.
2. Press the "Home Menu" button to display the "HOME MENU".
3. Select "Initial Setup" and press the "ENTER" button.
4. Select "Options" and press the "ENTER" button.
5. Select "System information" and press the "ENTER" button.
6. Select "Next Screen" and press the "ENTER" button
7. The firmware version of your player will be displayed on the TV screen.
If the version number is V01.08 or higher, it is not necessary to update the firmware.
If the version number is less than V01.08, it is necessary to update the firmware. Please continue to section B.
B. Download the system firmware ZIP file from Pioneer's website:
1. Download the file named "BDP-180_V01.08.zip" from the website to a folder on your computer.
C. Preparing a USB memory device for the System Firmware Update:
1. Have your USB memory device ready
Requirements of your USB memory device:
- USB specification 2.0.
- 128 MB or more in capacity.
- Should not contain any files.
2. Connect your USB memory device to your computer.
3. Double click the downloaded ZIP file "BDP-180_V01.08.zip" to open it.
4. Unzip it and save the files named "BDP-180_V01.08.bin" ," BDP-180_SUB.bin" ,"DVD.bin" and
"DLdiscidentifier.txt" to a folder on your computer.
5. Copy the all of files to your USB memory device.
6. Confirm the file name and the file size are correct on your USB memory device:
To check the file size in Microsoft Windows, select the file, press the right mouse button, and select "Properties". If
the file name and size do not match the ones listed below, perform sections B and C again.
BDP-180_V01.08.bin 90.4Mbyte (94,863,172byte)