Service Mode; Osd - Pioneer BDP-05FD Service Manual

1

6. SERVICE MODE

6.1 OSD

A
Indication items for the OSDs for debugging
Remote Control
Unit Command
[ESC]+[DISP] 1st screen Service Indication (software information)
B
2nd screen OSD Filter
[ESC]+[SIDE-B] 1st screen Specifications 1 for error rate measurement (with OK/NG judgment)
C
[ESC]+[DISP]+[2] 1st screen Specifications 2 for error rate measurement (for continuous playback)
[ESC]+[DISP]+[3] 1st screen ATA/ATAPI DEBUG OSD-Command history (ALL)
2nd screen ATA/ATAPI DEBUG OSD-Command history (ERROR)
D
3rd screen ATA/ATAPI DEBUG OSD-Drive maintenance data
4th screen ATA/ATAPI DEBUG OSD-Judgment of LD degradation
E
[ESC]+[DISP]+[4]
F
28
1
2
Screen Indication Items for the OSDs
Product serial No./destination
Model No.
Released version No.
Revision No.
Submicrocomputer version data
Drive model No.
Drive version No.
Drive serial No.
DVD-Video region No.
BD-ROM region No.
CPRM ID
MAC address
Setup value of the OSD FILTER
Results of error rate measurement OK/NG
Title/Chapter data
Playback duration data
LgcSct address data
Error rate data (error rate value)
Packet command from the host
Error data from the status register
Packet command that has been failed
Error Code
Command-specific information
Power ON/accumulated power-on duration
LD read power-on duration for the BD
LD read power-on duration for the DVD
Serial No. of the PU
Judgment of degradation of the LD for the BD (OK/NG)
Judgment of degradation of the LD for the DVD (OK/NG)
Judgment of degradation of the LD for the CD (OK/NG)
Temperature inside the writer
Results of self-diagnosis
Version/Revision Nos. of the SKY chip
HDMI transmitter IC check
Communication check of the submicrocomputer
PLL synthesizer check
DRIVE check
2
3
BDP-05FD
3
4
Remarks
The data must be displayed on
the subpage of the software
information screen.
To see the result, press ESC then SIDE-B.
4