Service Mode; Service Key Input - Pioneer BDP-95FD Service Manual

5

6. SERVICE MODE

QQ

6.1 SERVICE KEY INPUT

3 7 63 1515 0
How to enter each check mode
Each check mode described in this specification can be entered even during Normal Operation mode or for CA check,
by using the remote control unit for servicing.
Key names enclosed in quotation marks (" ") are those on the remote control unit for servicing.
No. Command Name
1
Settings at shipment
Error-Rate Measurement
2
mode 1 (with judgment)
3 Search mode
Checking of the keys on
4
the main unit
Switching of the settings
5
for OUTPUT FORMAT
6 Indications for Servicing
CPRM ID Registration
7
mode
8 Model Identification mode
TE
L 13942296513
9 On-Screen Display output
Audio muting at the last
10
stage of output
Switching of the LED
11
display
Switching of the AUDIO
12
MULTI output
Error-Rate Measurement
13 mode 2 (for continuous
playback)
14 4:3 Video out switch
Specifications of the ESC code
When the "ESC" key is pressed, ESCAPE mode is entered, and the next keypress will have a special meaning.
If any key other than the ones indicated in the above table is the first one pressed after the "ESC" key, ESCAPE
mode is canceled.
"ESC" key repeat is ignored, and ESCAPE mode is maintained.
www
.
5
http://www.xiaoyu163.com
6
Key Input
Press "ESC" then
For restoring the settings at shipment (The unit will not be turned
"CLEAR."
off.)
Press "ESC" then
After automatic error-rate measuring, the results are displayed.
"SIDE B."
Switching the numeric-key search from Chapter Search to Title
Press "ESC" then "+10."
Search during playback of BD-ROM or DVD-Video discs.
When a key on the main unit or the remote control unit is
pressed, the corresponding key code is displayed on the FL
Press "ESC" then
display. If check results of pressing all the keys on the main unit
"SIDE A."
(the order of keypresses can be random) are "OK," all the
segments on the FL display light.
The same operation as that when setting the Component output
Press "ESC" then "8."
to 480i.
Press "ESC" then The same operation as that when setting the Component output
"TV/LDP." to 480p.
The same operation as that when setting the Component output
Press "ESC" then "1."
to 1080i.
The same operation as that when setting the Component output
Press "ESC" then "CX."
to 1080p.
Press "ESC" then "DISP." For details on operations after key inputs, see the sheet "6.2
Screen indication for Service."
Press "ESC" then Enter the specific ID number for the CPRM and HDCP (and
"STEREO." DTCP) keys and the MAC address.
Press "ESC" then For confirmation of the destination and version number of the
"DIG/ANA." model.
Press "ESC," "SEARCH,"
For setting the On-Screen Display output to ON.
then "6," in that order.
Press "ESC," "SEARCH,"
For setting the On-Screen Display output to OFF.
then "7," in that order.
Press "ESC" then "9." For forcibly muting the audio output.
Press "ESC" then "0." For forcibly canceling audio muting
Press "ESC" then
All the segments on the LED display are lit.
"REPEAT A."
Press "ESC" then
All the segments on the LED display go dark.
"REPEAT B."
Press "ESC" then For setting the AUDIO MULTI output to All Channel Output mode
"CHAP."
Press "ESC," "DISP," After automatic error-rate measuring, the result is displayed as
then "2," in that order. an OSD.
Press "ESC", then
"FRM/TIM". Switch TV ASPECT ratio in Video out to 4 : 3 (Standard).
x ao u163
y
i
6
http://www.xiaoyu163.com
7
2 9
8
Operation/Usage
Q Q
3 6 7 1 3 1 5
co
.
BDP-95FD
7
8
9 4 2 8
Remarks
Special condition for entering the mode: The unit must not
be in Playback mode.
This check mode for settings at shipment (the unit will be
turned off) is the same as that entered by simultaneously
pressing the STOP and POWER keys on the main unit.
For details, refer to "6.3 How to measure the error rate."
Keypresses can be in no particular order. After all the keys
on the main unit are pressed, all the segments on the FL
display light. Until that, the corresponding key code is
displayed when any key is pressed.
The initial setting is Auto.
For details, see "8.3 CPRM ID number and Data setting."
For production use.
0 5 8 2 9 9 4 2 8
Use to stop the On-Screen Display output.
Special condition for entering the mode: The unit must be
in Playback mode.
For details, see "6.3 How to measure the error rate."
The intitial setting is 16 : 9 (Widescreen).
m
9 9
A
B
C
9 9
D
E
F
27
8