Nvr Search Utility - D-Link DNS-722-4 User Manual

Section 3 - Configuration
When the NVR is first powered on, during the initial boot sequence, it will wait to be assigned an IP address via DHCP.
If it does not receive a DHCP assigned IP address, by default it will have a self-assigned IP address of 192.168.0.32.
It is recommended to use the included D-Link NVR Search Utility when accessing and configuring the NVR for the
first time. If you would like to change the IP address before logging in or if you are unable to connect to the NVR IP
address, you can use the NVR Search Utility provided on the product CD to locate the device on your network and
make any necessary changes.
The NVR Search Utility displays the
Network Video
available NVR devices on the network.
Recorder:
Refresh the device list.
Refresh:
Click the Configuration button to open
Configuration:
a web browser for viewing, playback and
configuration. Double-clicking on the name
or IP of an NVR will also open a web
browser.
Configure the LAN Settings for the NVR
LAN:
here.
Click Apply to save and activate changes
Apply:
to the LAN Settings.
The system information for the selected
System Info:
NVR is displayed here.
D-Link DNS-722-4/DNS-726-4 User Manual

NVR Search Utility

18