Applications; D-Link Nvr Search Utility - Windows - D-Link DNR-312L User Manual

Section 5 - Applications

D-Link NVR Search Utility - Windows

In Windows, you can insert the CD and click NVR Search Utility to run another useful setup tool. When powered on, during
the initial boot sequence, the device will wait to be assigned an IP address via DHCP. If it does not receive a DHCP-assigned IP
address, the Auto-IP process will assign a 169.254.xxx.xxx address to the device. If you want to change the IP address before
logging in, or are unable to connect to the NVR IP address, you can use the NVR Search Utility provided on the product CD to
locate the device on your network and make any needed changes.
Network
The D-Link NVR Search Utility displays any NVR devices it
Video
detects on the network.
Recorder:
Refresh: Click to refresh the device list.
Configuration: Click Configuration to access the Web-based configuration
of the NVR.
LAN: Configure the LAN Settings for the NVR.
Receive Select Enable to use DHCP for your LAN IP settings, or
DHCP: Disable to use static IP.
Apply: Click Apply to save and activate the changes to the
LAN Settings.
About: Click About to view the software version of the NVR Search Utility.
Exit: Click Exit to close the utility.
D-Link DNR-312L User Manual

Applications

65