Configuration; Easy Search Utility - D-Link DNS-323 User Manual

Section 3 - Configuration
When first powered on, during the initial boot sequence, the DNS-323 will wait to be assigned an IP address via DHCP.
If it does not receive an assigned IP address, by default it will have a self-assigned IP address of 192.168.0.32. It is
recommended to use the included D-Link Easy Search Utility when accessing and configuring the DNS-323 for the
first time. If you want to change the IP address before logging in or are unable to connect to the DNS-323 IP address,
you can use the Easy Search Utility provided on the product CD to locate the device on your network and make any
needed changes.
Network Storage
The Easy Search Utility displays all available DNS-323 devices
Device
on the network here.
Refresh
Refresh the device list.

Configuration

Click Configuration to access the Web-based utility of the
DNS-323.
Language
Click Language if you wish to store non-English character files.
Refer to page 96.
LAN Configure the LAN Settings for the DNS-323 here.
Apply Click Apply to save and activate the changes to the LAN
Settings.
Drive Mapping Volumes available for mapping are displayed here.
Available Drive Choose an available drive letter. Click Connect to map the
selected volume. Click Disconnect to disconnect the selected
Letters
mapped volume.
Click Exit to close the utility.
Exit
About Click to see the basic firmware and copyright information about
D-Link Easy Search Utility.
D-Link DNS-323 User Manual
Configuration

Easy Search Utility

12