Hardware Specification - D-Link DNS-722-4 User Manual

Appendix C - Technical Specifications
SYSTEM STATUS
+ Camera status, System status
+ Still picture EMAP support
NETWORK SERVICE PROTOCOLS
+ IPV4, ARP, TCP, UDP, ICMP
+ DHCP Client
+ NTP Client (D-Link)
+ DNS Client
+ DDNS Client (D-Link)
+ SMTP Client
+ HTTP Server
+ PPPoE
+ UPnP
+ IP filtering
USER INTERFACE
+ HTTP Web browser - Internet Explorer v6 or later (32 bit OS only)
+ NVR Search Utility

Hardware Specification

STANDARDS
+ IEEE 802.3/u/z
+ Auto MDI/MDI-X
+ SATA I, II.
HARD DISK 1
+ Hard Disk control & manage via PC
+ Reformat Disk
+ RAID 0
+ RAID 1
2
+ JBOD
TWO RESET MODES
+ Reset firmware GUI button
+ HW reset button (press over 5 seconds)
FLASH ROM
+ 32MB
D-Link DNS-722-4/DNS-726-4 User Manual
RAM
+ 128MB DDR
NIC
+ Gigabit Ethernet LAN port (10/100/1000 Mbps)
I/O PORTS
+ RJ45 port x1
+ DC-in jack x1
+ USB port for UPS status update (optional)
POWER ADAPTER
+ DC12V/3A, DC5V/3A
RESET BUTTON
+ Reset to factory default
SECURITY
+ Front panel lock
+ Device lock hole
POWER CONSUMPTION
+ Max. power consumption: 23.59W
+ Standby state max. power consumption: 7.26W
DIMENSION (WXDXH)
+ 198 (W) x 104 (D) x 132 (H) mm (7.8 x 4.1 x 5.2 inches)
WEIGHT
+ 1.23 kg (2.7 lbs)
OPERATING TEMPERATURE
+ Operating: 0˚ to 55˚ C (32˚ to 131˚ F)
+ Storage: -20˚ to 70˚ C (-4˚ to 158˚ F)
HUMIDITY
+ Operating: 5% to 90% (non-condensing)
PACKAGE CONTENTS
+ 2-Bay NVR
+ Power Adapter
+ Ethernet Cable
83