D-Link Nvr Search Utility - D-Link DNR-326 User Manual

Section 2 - Getting Started
When first powered on, during the initial boot sequence, the device will wait to be assigned an IP address via DHCP. If it does
not receive a DHCP-assigned IP address, the Auto-IP process will assign a 169.254.xxx.xxx address to the device If you want to
change the IP address before login or are unable to connect to the NVR IP address, you can use the NVR Search Utility provided
on the product CD to locate the device on your network and make any needed changes.
Network Video
The D-Link NVR Search Utility displays any NVR devices it detects on the
Recorder: network.
Refresh: Click to refresh the device list.
Configuration: Click Configuration to access the Web-based configuration of the NVR.
LAN: Configure the LAN Settings for the NVR here.
Apply: Click Apply to save and activate the changes to the LAN Settings.
Drive Mapping: Volumes available for mapping are displayed here.
Available Drive Select an available drive letter. Click Connect to map the selected volume.
Letters: Click Disconnect to disconnect the selected mapped volume.
About: Click About to view the software version of the NVR Search Utility.
Exit: Click Exit to close the utility.
D-Link DNR-326 User Manual

D-Link NVR Search Utility

13