D-Link Nvr Search Utility - D-Link mydlink DNR-322L User Manual

Section 3 - Configuration
You can insert the CD and click NVR Search Utility to run another useful setup tool. When first powered on, during the initial
boot sequence, the device will wait to be assigned an IP address via DHCP. If it does not receive a DHCP-assigned IP address
the Auto-IP process will assign a 169.254.xxx.xxx address to the device. If you want to change the IP address before logging in
or are unable to connect to the NVR IP address, you can use the NVR Search Utility provided on the product CD to locate the
device on your network and make any needed changes.
Network Video
The D-Link NVR Search Utility displays any NVR devices it detects on the
Recorder: network.
Refresh: Click to refresh the device list.
Configuration: Click Configuration to access the Web-based configuration of the NVR.
LAN: Configure the LAN Settings for the NVR.
Apply: Click Apply to save and activate the changes to the LAN Settings.
Drive Mapping: Volumes available for mapping are displayed here.
Available Drive Select an available drive letter. Click Connect to map the selected volume.
Letters: Click Disconnect to disconnect the selected mapped volume.
About: Click About to view the software version of the NVR Search Utility.
Exit: Click Exit to close the utility.
D-Link DNR-322L User Manual
D-Link NVR Search Utility
27