Replacing Or Adding A New Hard Drive - D-Link DNS-722-4 User Manual

Appendix B - Replacing or Adding a new Hard Drive

Replacing or Adding a New Hard Drive

It is recommended that you backup your important files before replacing or adding a new hard drive to the NVR.
Replacing a Hard Drive:
Please make sure the power is off before replacing a hard drive. After you have installed the new drive, turn on the
NVR and then connect to the Web UI. The NVR will prompt you to format the new drive (Standard, RAID 1 mode) or
both drives (JBOD, RAID 0 mode).
Adding a New Hard Drive:
The NVR is able to work with one single hard drive under Standard mode. Please make sure the power is off before
installing a second hard drive.
After you have installed the new drive, turn on the NVR and then connect to the Web UI. The NVR will prompt you to
format the new drive.
Note: Formatting a hard drive will erase the data stored on the hard drive. Please backup important data before
formatting a hard drive.
D-Link DNS-722-4/DNS-726-4 User Manual 81