Connecting To A Wireless Internet Network With Wps - Samsung H5500series E-Manual

51
IP Settings
In the
Mask, Gateway, and
●
Use one of the following methods to enter the numerical values.
Set the numbers using the
Using Samsung Smart Control: Press
the pointer fix the focus,then tap on the touchpad,enter the numbers from the popup menu.
Using the remote control（only for H5500/H6800/H6088 series）: Enter the numbers directly
using numerical button.
IP Settings
IP setting
IP Address
Subnet Mask
Gateway
DNS setting
DNS Server
OK
61
The TV attempts to connect to the network again using the specified settings. A confirmation
message appears once a connection is established. Select OK.
"
The network connection speed may differ depending on the DNS server settings.
"
For details on the DNS server settings, contact the Internet service provider (ISP).

Connecting to a Wireless Internet Network with WPS

MENU Network Network Settings
> >
With wireless routers that support WPS (Wi-Fi Protected Setup) or PBC (Push Button Configuration),
it's possible to press a button on the router to connect the TV to the Internet.
"
This functionality is not available with wireless routers that do not support WPS. Check to see if your
wireless router supports WPS.
11
Network Type
Setting the
21
WPS(PBC)
Select
minutes.
31
The TV exchanges the network name (SSID) and security key automatically and then attempts to
connect to the Internet. A confirmation message appears once a connection is established. Select
OK.
IP setting
screen, set the
DNS Server values, and then select OK.
u
and
Enter manually
0.0.0.0
0.0.0.0
0.0.0.0
Enter manually
0.0.0.0
Cancel
Wireless
to
and then press the WPS or PBC button located on the wireless router within two
Enter manually, enter the
to
d
buttons.
KEYPAD
button and enter the numbers directly. Or use
automatically displays a list of available wireless networks.
IP Address, Subnet