Samsung H5500series E-Manual page 172

The Problem
Flickering and Dimming
Component
Connections/Screen
Colour
Screen Brightness
Motion Plus/Blur
Unwanted Powering
Off
Problems Powering On
Unable to find a
Channel
If your Samsung Television is flickering or dimming sporadically, you may need
to disable some of the energy efficiency features. Disable
System Eco Solution
> >
Solution Eco Sensor).
>
If the colour on your Samsung television screen is not correct or the black and
white colours are off, run
Test).
If the test results indicate that the problem is not caused by the TV, do the
following:
●
Confirm that the TV's video input connectors are connected to the
correct external device video output connectors.
●
Check the other connections as well. If the TV is connected to an
external device via a component cable, confirm that the Pb, Pr, and Y
jacks are plugged into their proper connectors.
If the colours on your Samsung TV are correct but just a little too dark or bright,
try adjusting the following settings first.
Picture
●
Go to the
Sharpness, Colour, and
If you notice ghosting or blurring on the screen, use the
Picture Picture Options
> >
If your Samsung TV appears to turn off by itself, try disabling some of the TV's
energy efficiency features. See if
Timer) has been enabled. The
specified period of time. If the Sleep Timer has not been enabled, see if
Power Off (MENU System
>
Off (MENU System
> >
disable them.
When the TV is turned on, the remote control receiver flashes 5 times before the
screen turns on.
If you are having problems powering on your Samsung television, there are a
number of things to check before calling the service department. Confirm that the
TV's power cord is connected correctly at both ends and that the remote control
is operating normally. Make sure that the antenna cable or cable TV cable is firmly
connected. If you have a cable/satellite box confirm that it is plugged in and
turned on.
Setup (MENU
Launch >
Auto Tuning).
If your TV is not connected to a cable box or satellite box, run
System > Setup) or Auto Tuning (MENU
Try this!
Energy Saving) or
>
Picture Test (MENU
menu and adjust the Contrast, Brightness,
Tint (G/R)
settings.
Motion Plus) to resolve the issue.
>
Sleep Timer (MENU
Sleep Timer
automatically turns the TV off after a
Eco Solution
> >
Eco Solution Auto Power
>
System > Setup) or Auto Tuning (MENU
Broadcasting
>
Energy Saving (MENU
Eco Sensor (MENU System
>
Support Self Diagnosis
> >
Motion Plus
System Time
> >
No Signal Power Off) or
Off) has been enabled and
Broadcasting
>
Setup (MENU
Auto Tuning).
>
Eco
>
Picture
>
option (MENU
Sleep
>
No Signal
Auto Power
>
>