Fine-Tuning The Screen - Samsung H5500series E-Manual

When Aerial Source is set to Terrestrial or Cable
Digital Channel Tuning
●
Scans for a digital channel.
11
Select the New.
"
When selecting
"
When selecting
21
Select the Search. When scanning has finished, a channel is updated in the channel list.
Analogue Channel Tuning
●
Scans for an analogue channel.
11
Select the New.
21
Set the Programme,
31
Select the Store. When scanning has finished, a channel is updated in the channel list.
Channel mode
P
●
(programme mode)
When tuning is complete, the broadcasting stations in your area have been assigned to position
numbers from P0 to P99. You can select a channel by entering the position number in this mode.
C
●
(aerial channel mode) /
These two modes allow you to select a channel by entering the assigned number for each aerial
broadcasting station or cable channel.

Fine-Tuning the Screen

MENU Broadcasting
>
"
Available for analogue broadcasts only.
Analogue pictures can become shaky and full of noise. If this happens, you can fine-tune the signal
and/or reduce noise to clear up the picture.
11
MENU
Select >
21
Make adjustments using the Samsung Smart Control until the picture clears up and then select
Save or Close. Select
Aerial → Terrestrial: Channel,
Aerial → Cable: Frequency, Modulation,
Colour System,
S Z
or (cable channel mode)
Channel Settings
>
Broadcasting Fine
>
Reset
to reset the Fine-Tune operation.
Frequency
Symbol Rate
Sound System, Channel
Fine Tune
>
Try Now
Tune. An adjustment bar appears on the screen.
and Search.