Connecting to a Wireless Internet Network Manually
With networks that require a static IP address, you will need to enter the IP address, subnet mask,
gateway and DNS values manually to connect to the network. To get the IP address, subnet mask,
gateway and DNS values, contact your Internet Service Provider (ISP).
Refer to the "Dynamic versus Static IP Addresses" section for more information on dynamic IP and static IP
Select your network type.
Select the network (SSID) you want to connect to. If the wireless router doesn't appear in the list,
Network, and enter the network's SSID manually.
Enter the security key and select OK. If the selected network is not security-enabled, the TV
attempts to connect right away.
when the TV attempts to connect to the network. Once the network connection has
been interrupted, select
Connection verification cancelled.
Wireless network connection test stopped.
automatically displays a list of available wireless networks.
You can connect your TV to the
internet. Please select which
wireless network to use.