Controlling The Tv With Your Voice (Voice Interaction / Voice Control); Enabling Voice Control - Samsung H5500series E-Manual

Controlling the TV with Your Voice (Voice Interaction /
Voice Control) (Not supported for H5500/H6800/H6088
series)
"
Availability depends on the specific model.
MENU System Voice Interaction
> >
You can access and select certain menu options and functions using voice commands. For more
effective voice recognition, speak slowly and clearly in the language specified in the
Interaction Voice Control
/
"
Voice Control is classified into two: interactive voice control that enables conversational instructions, and
imperative voice control where only pre-defined instructions are used. Smart Hub setup, and time settings,
as well as the user's agreement on the use terms. Trying the interactive voice control without completing
any of these requirements will display a notification popup. Follow the onscreen instructions and complete
the necessary settings. The imperative voice control is available regardless of the interactive voice control
settings. Use only "pre-defined commands" in the imperative voice control mode.
"
Please read through the instructions before using Voice Control. For more information, refer to "Read Before
Using Voice, Motion, or Face Recognition".

Enabling Voice Control

11
VOICE
Press the
Voice Control
screen when
21
Say a command. You can use Voice Control to operate the TV when you are watching the TV or
other videos.
"
Say the command from 10cm to 15cm away from the microphone on the Samsung Smart Control.
Voice commands may not be recognized properly if you speak too softly or loudly. The optimal volume
for voice commands is between 75 dB and 80dB.
Using the Voice Control Tutorial
MENU Support Voice Recognition Tutorial
> >
This lets you familiarize yourself with the basics of using Voice Control. Run
Tutorial Support
from the
Voice Control
/
Language
> option.
button on the Samsung Smart Control. The microphone icon appears on the
is enabled.
Try Now
menu, or run Voice Control and say "Tutorial".
System Voice
>
Voice Recognition