Jeep 2011 Liberty Owner's Manual page 240

Remote Key Lock feature. To make your selection, press
and release the FUNCTION SELECT button until "On"
or "Off" appears.
Automatically Move Seat Back on Exit —
If Equipped
This feature provides automatic driver seat positioning to
enhance driver mobility when entering and exiting the
vehicle. To make your selection, press and release the
FUNCTION SELECT button until "On" or "Off" appears.
NOTE: The seat will return to the memorized seat
location (if Recall Memory with Remote Key Unlock is set
to ON) when the RKE transmitter is used to unlock the
door. Refer to "Driver Memory Seat" in "Understanding
The Features Of Your Vehicle" for further information.
Flash Lights with Remote Key Lock
When on is selected, the front and rear turn signals will
flash when the doors are locked or unlocked with the
RKE transmitter. This feature may be selected with or
UNDERSTANDING YOUR INSTRUMENT PANEL 239
without the sound horn on lock feature selected. To make
your selection, press and release the FUNCTION SE-
LECT button until "On" or "Off" appears.
Headlights On with Wipers
(Available with Auto Headlights Only)
When on is selected, and the headlight switch is in the
AUTO position, the headlights will turn on approxi-
mately 10 seconds after the wipers are turned on. If the
headlights were turned on by this feature they will also
turn off when the wipers are turned off. To make your
selection, press and release the FUNCTION SELECT
button until "On" or "Off" appears.
NOTE: Turning the headlights on during the daytime
causes the instrument panel lights to dim. To increase the
brightness, refer to "Lights" in "Understanding The
Features Of Your Vehicle".
4