Fitting The Front Panel; Front Panel Dimensions - Miele T 4859 Ci Operating Instructions Manual

Fitting the front panel

The appliance front can be fitted with a
door panel to match other kitchen units.
If fitted in a Miele kitchen, the door
panel can be ordered pre-drilled with
the necessary fixing holes.
If fitted in a non-Miele kitchen, a
suitable panel will have to be drilled
to suit by a qualified kitchen fitter.
See "Fitting a door front panel made
by another manufacturer" for details
on preparing and drilling the fixing
holes.

Front panel dimensions

Width: 592-596 mm
Thickness: 17 to 19 mm (corresponding
to the thickness of the adjacent unit
door front panels)
Height: The height of the door front
panel corresponds to the door height
(H) of the adjacent units.
Installation and connection
Fitting the front panel
Open the door.
Hold the front panel in the correct
position in front of the appliance
door.
Screw the front panel to the machine
door.
If all the spacer bars have been
removed:
You can also make use of the 3 holes at
the top of the door plate to screw the
front panel to the door plate.
57