The Safety Placards And Their Messages-Vital Information For All Personnel - Milnor 30022H7J Safety Manual

BIUUUS01 (Published) Book specs- Dates: 20020618 / 20020618 / 20020618 Lang: ENG01 Applic: RHU RMV RQV
2. The Safety Placards and Their Messages—Vital Information for
All Personnel
Safety placards are affixed to your Milnor
personnel of hazards that can result from improper use or maintenance. The safety placards help
to ensure a safe work environment and, as with any other machine component, must be properly
maintained. Placards must be kept clean so that the pictorials and wording are not obscured.
They must be replaced immediately, if lost or damaged. A parts page is provided in the
documentation identifying the placards, their locations on the machine, and their replacement part
numbers.
The placarded message shown in Figure 1 reminds personnel to read the manuals first. This safety
manual explains the placarded messages in more detail. The various user manuals may also
contain detailed information regarding hazards addressed by the placards. If you are not clear
about a hazard, review all applicable manuals. If you are still unsure, consult your supervisor.
Figure 1: Message About Reading the Manuals
The other messages conveyed by the safety placards address hazards in general terms and remind
personnel to stop and think before performing certain actions. A placard may contain more than
one message. The following provides more specific information regarding each message and its
associated hazard(s). Each placarded message is shown first, followed by more detailed
information.
®
machine at the appropriate locations. These advise
8
PELLERIN MILNOR CORPORATION