Personnel; Safety Devices - Milnor 30022H7J Safety Manual

General Safety Requirements—Vital Information for Management Personnel
Provide any safety guards, fences, restraints, devices, and verbal and/or posted restrictions
necessary to prevent personnel, machines, or other moving machinery from accessing the
machine or its path. Provide adequate ventilation to carry away heat and vapors. Ensure service
connections to installed machines meet local and national safety standards, especially regarding
the electrical disconnect (see the National Electric Code). Prominently post safety information,
including signs showing the source of electrical disconnect.

Personnel

1.2.
Inform personnel about hazard avoidance and the importance of care and common sense. Provide
personnel with the safety and operating instructions that apply to them. Verify that personnel use
proper safety and operating procedures. Verify that personnel understand and abide by the
warnings on the machine and precautions in the instruction manuals.
WARNING 1 : Multiple Hazards—Careless operator actions can kill or injure personnel,
damage or destroy the machine, damage property, and/or void the warranty.
• Do not tamper with or disable any safety device or operate the machine with a
malfunctioning safety device. Request authorized service.
• Do not operate a damaged or malfunctioning machine. Request authorized service.
• Do not attempt unauthorized servicing, repairs, or modification.
• Do not use the machine in any manner contrary to the factory instructions.
• Use the machine only for its customary and intended purpose.
• Understand the consequences of operating manually.

Safety Devices

1.3.
Ensure that no one eliminates or disables any safety device on the machine or in the facility. Do
not allow machine to be used with any missing guard, cover, panel or door. Service any failing or
malfunctioning device before operating the machine.
DANGER 2 : Entangle and Sever Hazards—Cylinder door interlock—Operating the
machine with a malfunctioning door interlock can permit opening the door when the cylinder is
turning and/or starting the cycle with the door open, exposing the turning cylinder.
• Do not operate the machine with any evidence of damage or malfunction.
WARNING 3 : Multiple Hazards—Operating the machine with an inoperative safety device
can kill or injure personnel, damage or destroy the machine, damage property, and/or void the
warranty.
• Do not tamper with or disable any safety device or operate the machine with a
malfunctioning safety device. Request authorized service.
WARNING 4 : Electrocution and Electrical Burn Hazards—Electric box doors—
Operating the machine with any electric box door unlocked can expose high voltage conductors
inside the box.
• Do not unlock or open electric box doors.
WARNING 5 : Entangle and Crush Hazards—Guards, covers, and panels—Operating the
machine with any guard, cover, or panel removed exposes moving components.
• Do not remove guards, covers, or panels.
PELLERIN MILNOR CORPORATION
6