Careless Use Hazards; Careless Operation Hazards-Vital Information For Operator Personnel (See Also Operator Hazards Throughout Manual); Careless Servicing Hazards-Vital Information For Service Personnel (See Also Service Hazards Throughout Manuals) - Milnor 36021 Maintenance Manual

Safety
WARNING: Explosion Hazards — Clutch and speed switch (multiple motor ma-
2.1.3.2

Careless Use Hazards

2.1.3.2.1 Careless Operation Hazards—Vital Information for Operator Personnel
(see also operator hazards throughout manual)
WARNING: Multiple Hazards — Careless operator actions can kill or injure person-
warranty.
Do not tamper with or disable any safety device or operate the machine with a mal-
�
functioning safety device. Request authorized service.
Do not operate a damaged or malfunctioning machine. Request authorized service.
�
Do not attempt unauthorized servicing, repairs, or modification.
�
Do not use the machine in any manner contrary to the factory instructions.
�
Use the machine only for its customary and intended purpose.
�
Understand the consequences of operating manually.
�
2.1.3.2.2 Careless Servicing Hazards—Vital Information for Service Personnel (see
also service hazards throughout manuals)
WARNING: Electrocution and Electrical Burn Hazards — Contact with electric
out is called for in the service instructions. Outside the USA, abide by the OSHA standard
in the absence of any other overriding standard.
WARNING: Entangle and Crush Hazards — Contact with moving components nor-
out is called for in the service instructions. Outside the USA, abide by the OSHA standard
in the absence of any other overriding standard.
8
chines)—A damaged clutch or speed switch can permit the low speed mo-
tor to engage during extract. This will over-speed the motor and pulleys
and can cause them to rip apart, discharging metal fragments at high speed.
Stop the machine immediately if any of these conditions occur: • ab-
�
normal whining sound during extract • skidding sound as extract ends •
clutches remain engaged or re-engage during extract
nel, damage or destroy the machine, damage property, and/or void the
power can kill or seriously injure you. Electric power is present inside the
cabinetry unless the main machine power disconnect is off.
Do not service the machine unless qualified and authorized. You must
�
clearly understand the hazards and how to avoid them.
Abide by the current OSHA lockout/tagout standard when lockout/tag-
�
mally isolated by guards, covers, and panels, can entangle and crush your
limbs. These components move automatically.
Do not service the machine unless qualified and authorized. You must
�
clearly understand the hazards and how to avoid them.
Abide by the current OSHA lockout/tagout standard when lockout/tag-
�
BNWRUS04.C05 0000234651 A.5 B.3 A.2 1/2/20 2:19 PM Released
BNWRUS04.C06 0000234650 A.5 B.3 A.3 1/2/20 2:19 PM Released
BNWRUS04.C07 0000234649 A.5 B.3 A.3 1/2/20 2:19 PM Released
Pellerin Milnor Corporation