Table of Contents
Advertisement
F. Why is access to the security network camera not possible while I am setting options in the application?
A. If the security network cameras are started by events, snapshots need more time since they are written to
memory. If the events occur too often, the system is constantly trying to store the pictures. If an event occurs very
frequently, use sequential mode or an external recording program to record the pictures. If you want to access the
pictures via FTP, the parameter can be set lower since FTP responds faster than the web. If the system is busy with
configuration, press the reset button to restore the factory settings and store the system.
42
Advertisement
Table of Contents
