Table of Contents
Advertisement
Access to the network camera via the Internet Explorer
Defining a password to prevent unauthorised access
For security reasons, the administrator should define a new password immediately. After the new administrator
password is stored, the IR dome network camera asks for the user name and password every time it is accessed.
The administrator can define up to twenty (20) user accounts. Every user has access to the IR dome network
camera, but not to the system configuration. Some system-critical functions are reserved for the administrator, such
as system configuration, user administration and upgrading software programs. The administrator's user name is
always root and cannot be changed. Following a password change, the browser displays an authentication
window and asks for the new password. After changing the password, you cannot restore the original
administrator password. Your only option is to reset all default factory settings/parameters.
To enter the password:
Open the Internet Explorer and enter the IP address of the camera
(e.g.: <http://192.168.0.99>).
You are prompted for authentication:
You are now connected with the IR dome network camera and can see a video stream.
Note: It may happen that your PC's security settings prevent a video stream. You can change the security
settings to a lower level under "Tools/Internet Options/Security". Make sure you enable Active X Control
Elements and Downloads.
13
Advertisement
Table of Contents
