Table of Contents
Advertisement
Motion sensor
„Enable motion detection" Check this option to turn on motion detection.
Adds a new window. A maximum of three windows can be open simultaneously. To resize the window
or move the title bar, click the window frame, keep the mouse button pressed and drag the window to the required
size. Close the window by clicking the "x" in the top right corner.
Click this button to save window settings. A bar graph rises or falls according to the picture variation. A
green bar means that the picture variation is below the surveillance level, while a red bar means that the picture
variation is above the surveillance level. If the bar is red, the detected window appears with a red frame. When you
return to the homepage, the monitored window is hidden. As soon as motion is detected, the red frame is
displayed.
„Window Name" The text appears at the top of the window.
„Sensivity" Sensitivity in changes of picture sequence (e.g.: sensitivity high: triggering by slight picture change).
„Percentage" Detectable object size (low: small objects are detected; high: only large objects are detected)
This figure shows the screen after you click
"url" http://"Network Camera"/setup/motion.vspx
"Network Camera" is the domain name or original IP address of the security network camera.
.
37
Advertisement
Table of Contents
