Table of Contents
Advertisement
10. Now click "Next" to change the IP address of your network camera.
If you use a router in your network, enter this IP address (gateway) in the Default Router field.
11. If you disable "Reset IP address at next boot", you do not have to reassign the IP address of this camera
following a power failure. Otherwise, you have to reassign the IP address after every camera restart.
12. Click "Next".
13. Follow the instructions on the screen to save or change your settings.
The Installation Wizard is finished. Click "Previous" to change your settings. Click "Apply" to save your
input and transfer it to the selected device.
11
Advertisement
Table of Contents
