Table of Contents
Advertisement
Two settings are available on the Client settings page. Under "Media Options", you can disable the audio function.
Under "Protocol Options", you can select a transmission protocol for data transfer between the client and the
server. Three protocol options are available for optimising the application: UDPand HTTP.
The UDP protocol gives you a larger number of realtime audio and video streams. However, some data packets
can be lost due to the large data volume in the network. Pictures can be unclear. The UDP protocol is
recommended if you have no special requirements.
Use the HTTP protocol if the network is protected by a firewall and only the HTTP port (80) is to be opened. In this
mode, no audio is transmitted.
The selection of the client is normally recommended in the following order: UDP – HTTP. When the IR dome
network camera has been successfully connected, the "Protocol Options" box shows the selected protocol. The
selected protocol is registered in your PC and used for the next connection. After changing the network environment
or if you want to search again for the IR dome network camera using the web browser, select the UDP protocol
manually, save it and then return to "HOME" to set up the connection again.
"Streaming Options" For users to select the video streaming types. Select "Streaming Video" option, the video
connection will keep alive to enable you to see smooth video, while "Single JPEG" option will let you see the video
in JPEG format by client periodic update the JPEG image from server according to the "Frame rate" settings.
"Talk Button Control Style" For the user to determine whether to "click once and talk" or "push to talk".
<url> http://<Network Camera>/protocol.html
Network Camera is the original IP address or the hostname of the IR dome network camera.
19
Advertisement
Table of Contents
