Electrical Connection - Miele HR 1421 Installation Instructions Manual

Electrical connection


CAUTION:
During installation, maintenance and
repair work, the range must be
disconnected from the electricity
supply. It is only completely isolated
from the electricity supply if the plug
fuses have been fully unscrewed
(where applicable), the main circuit
breaker has been tripped or the
power cable has been unplugged
from the wall outlet.
Installation, repair and maintenance
work should only be performed by a
Miele authorized service technician.
Work by unqualified persons can
cause considerable danger to users.
Miele cannot be held liable for any
damage arising as a result of such
work.
To avoid damaging the range, make
sure that the connection data
(voltage and frequency) on the data
plate correspond to the building's
power supply before connecting the
appliance.
When in doubt, consult a qualified
electrician.
The power cable plug must be
inserted into a suitable outlet that
has been installed and grounded in
compliance with all applicable local
regulations.
WARNING: THIS APPLIANCE MUST
BE GROUNDED
Installer: Please pass these
instructions on to the customer.
72