Table of Contents
Advertisement
Web Configuration
Select Advanced Setup > QoS Classification. In this page, you
can configure network traffic classes.
Click Add to create a traffic class rule to classify the upstream
traffic.
Traffic Class Name: Enter a name of the class.
Rule Order: Select order for queue.
Rule Status: Enable or disable this traffic class rule.
Assign Classification Queue: Select a classification queue.
Assign Differentiated Service Code Point (DSCP) Mark:
Select a mark service that modifies the original packet IP header
if all rules defined within the classification class are matched.
(CS-Mark IP Precedence, AF-Assured Forwarding, EF-Expedited
Forwarding)
Mark 802.1p if 802.1q is Enabled: Select an 802.1p priority
number that serves as the 802.1p value.
There are two sets of classification rules. Set-1 is based on
different fields within TCP/UDP/IP layer plus physical LAN port;
Set-2 is based on IEEE 802.1p priority field.
D-Link DSL-500B User Manual
64
Advertisement
Table of Contents
