Table of Contents
Advertisement
Web Configuration
Step 4
To use IGMP service on PPPoA PVC, check the Enable IGMP
Multicast and the Enable WAN Service box and enter a Service
Name.
Note: Do not modify the default MTU value setting unless your ISP
advises you to change it.
Click Next to continue.
Step 5
Enter the IP Address and Subnet Mask for the LAN interface. In
addition, you can either enable or disable the DHCP server.
To enable the DHCP server, enter a start and end IP address, and
the Subnet Mask of the Router. You may also choose to change
the default value of the lease time.
Click Next to continue.
D-Link DSL-500B User Manual
26
Advertisement
Table of Contents
