Table of Contents
Advertisement
Web Configuration
Step 4
To use IGMP service on MER pvc, check the Enable IGMP
Multicast box.
In the MER mode, you can configure the following functions:
Enable NAT
ƒ
Enable Firewall
ƒ
Click Next to continue.
Step 5
Enter the IP Address and Subnet Mask for the LAN interface. In
addition, you can either enable or disable the DHCP server.
To enable the DHCP server, enter a start and end IP address,
and the Subnet Mask. You may also choose to change the default
value of the lease time. Click Next to continue.
D-Link DSL-500B User Manual
32
Advertisement
Table of Contents
