Outgoing Ip Filtering Setup; Incoming Ip Filtering Setup - D-Link DSL-500B User Manual

Web Configuration

Outgoing IP Filtering Setup

In this page, you can create a filter rule to identify outgoing IP
traffic by specifying a new filter name and at least one condition. All
specified conditions in the filtering rule must comply with the rule to
take effect.
Click Save/Apply to save and activate the filter.

Incoming IP Filtering Setup

Select Security > IP Filtering > Incoming. The Incoming IP
Filtering Setup page will appear.
By default, all incoming IP traffic from the WAN is blocked when
the firewall is enabled. However, some IP traffic can be accepted
by setting up filters.
Click Add and the Add IP Filter- Incoming page will appear.
In this page, you can create a filter rule to identify incoming IP
traffic by specifying a new filter name and at least one condition. All
specified conditions in this filter rule must comply with the rule.
Click Save/Apply to save and activate the filter.
Note: You should select at least one WAN interface to apply this
rule.
D-Link DSL-500B User Manual 56