Web Configuration
PPP over Ethernet (PPPoE)
Step 1
In the PVC and its QoS configuration page, configure a PVC and
its QoS.
Step 2
In the Internet connection type and encapsulation type page, set
the Connection Type to PPP over Ethernet (PPPoE) and select
the Encapsulation Mode from the drop-down box and click Next
to continue.
Step 3
The PPP Username and Password page will appear. Update the
following fields and click Next to continue.
Your ISP should provide you with the following information:
PPP Username
PPP Password
Authentication Method
You can also select another service function as follows:
Dial on demand (with idle timeout timer)
PPP IP extension
Use Static IP Address
Retry PPP password on authentication error
Enable PPP Debug Mode
D-Link DSL-500B User Manual
28