D-Link DSL-500B User Manual page 61

Adsl router

Hide thumbs Also See for DSL-500B:

Table of Contents

Web Configuration

QoS Queue Configuration

The queuing in packet QoS becomes effective only when packet is

forwarded to QoS-enabled PVC. Packet forwarding is determined

by IP routing or bridging, not under control of the packet QoS.

Select Advanced Setup > Queue Config. In this page, you can

configure QoS queue. A maximum of 24 entries can be configured.

QoS Queue Configuration can allocate four queues. Each of the

queues can be configured for a precedence value (Lower integer

values for precedence imply higher priority for this queue relative

to others). The queue entry configured is used by the classifier to

place ingress packets appropriately.

Note: Lower integer values for precedence imply higher priority for

this queue relative to others. For example, add a QoS queue entry

and allocate it to a specific network interface (PVC 0/0/35). Set

integer values for queue precedence to 1.

Click Add to configure a QoS Queue configuration entry.

D-Link DSL-500B User Manual

Table of Contents