Table of Contents
Advertisement
Web Configuration
In this page, you can modify VPI/VCI, service categories, and QoS.
VPI: Virtual path between two points in an ATM network. Its valid
value range is from 0 to 255.
VCI: Virtual channel between two points in an ATM network. Its
valid value range is from 32 to 65535 (1 to 31 are reserved for
known protocols).
Service Category: UBR Without PCR/UBR With PCR/CBR/Non
Realtime VBR/Realtime VBR.
Enable Quality Of Service: Enable or disable QoS.
After the modifications, click Next and the Connection Type page
will appear.
This page allows you to select the appropriate connection type.
The choices include PPP over ATM (PPPoA), PPP over Ethernet
(PPPoE), MAC Encapsulation Routing (MER), IP over ATM
(IPoA), and Bridging (default).
Select the desired Encapsulation Mode from the drop-down box
and then click Next to continue.
Refer to the Quick Setup section for more information on the five
connection types available in the Router.
D-Link DSL-500B User Manual
44
Advertisement
Table of Contents
